|
Infrared radiation can be used in a variety of different applications, from drying and curing to preheating before a convective oven.
P
|
|
|
Electro-coating is an organic coating method that uses electrical current to deposit paint onto a part or assembled product. Because of its ability to coat even the most complex parts and assembled products with specific performance requirements, electro-coating is used throughout industry as a means to coat products in various categories ...
P
|
|
|
Wood and marble effect film coating system
In order to have a wood or marble effect on aluminum profiles the parts should be powder coated first. Process starts with covering the profiles with sheet film. After treating the sheeted profiles with heat film transfers on the profiles. This film is capable ...
P
|
|
|
Powder Coating is environmentally friendly. Unlike liquid finishing where solvents are used, powder coatings do not release Volatile Organic Compounds (VOC’s) into the atmosphere. Further more, powder can be recycled and used again, therefore making Powder Coating more economical. Powder Coating is the right solution to fulfill high demands in performance ...
P
|
|
|
Pretreatment systems are one of the key processes for painted parts quality.
Procedures for preparation of parts for painting often include a pre- cleaning step. Removal of oil, grease, scale, weld spatter, lubricants and other materials can be accomplished by mechanical means, with solvents, acids, or alkaline cleaning agents.
While the ...
P
|
|
|
Anodic oxidation is a special surface treatment method and creating by electrochemical treatment. The oxidation layer has a perfect configuration with aluminum. Oxidation layer is very hard and good for erosion; this gives a big advantage to aluminum profiles applications. After sealing application it also gives a chemical resistance. Oxidation layer ...
P
|
|
|
High capacity aluminum profiles manufacturer needs artificial ageing of the aluminum profiles after the extrusion process. For homogenous air inside the oven horizontal and vertical air flow is applicable.
For long parts homogenous air temperature is maintained by reverse or longitudinal air flow and the suction from the center of the ...
P
|
|
|
Liquid Paint Application Booth
The purpose of a spray booth is to confine the application of hazardous material to a restricted controlled environment. Spray booths prevent hazardous over spray and volatiles from escaping confinement and causing fire or explosion hazard to nearby operations. The primary function of a paint spray booth is ...
P
|
|
|
Transfer systems are used to take the parts from one point to another with safest and with optimum cost. Depending on the size, number and weight of the parts alternative solutions are applicable.
Monorail Conveyor
All kind of weights and various production capacities use this type of conveyors. Various number of drive ...
P
|
|
|
The desired outcome is for the combination of pretreatment, application, and cure to produce a coating with specific physical and chemical properties. Understanding the operation of a convection oven requires the examination of the systems at work within the unit. There are five major components in an oven: the shell, the ...
P
|
|